Apricus Solar Hot Water
电竞竞猜网Installing an Apricus evacuated tube solar hot water system can dramatically reduce your home energy usage. North Coast Power and Water have been supplying Apricus solar hot water systems to Coffs Harbour?and surrounding?regions?since 2009.
We are the local Apricus solar hot water specialists. We provide sales, installation training for plumbers,?technical support, we stock spare parts and can troubleshoot most issues over the phone prior to sending out a tradesman.
When you invest in solar hot water with NCPW, you’re gaining the best possible support and experience。
Apricus Solar Hot Water Features:
- Superior cold weather performance – when you need it the most!
- 15 Year warranty on roof collectors
- 10 Year warranty on storage tanks
- Lightweight, less than 115kg full of water
- Frost protected without the use of glycol
- Rated for cyclonic wind conditions
Apricus Solar Hot Water Frequently Asked Questions
Q. How strong are the tubes? Will tubes break easy? Glass tube strength?
A.?Apricus evacuated tube collectors are made to Australian and International?standards. The tubes have been independently tested & shown to withstand hail impact from a 25mm / 1″ ice ball at 90km/hr.
Q. What happens when a tube breaks? Will my system stop after a hail storm? What if someone throws rocks at the tubes?
A.?The Apricus evacuated tube design does not circulate water through the evacuated tube – So if a tube is damaged, you will not experience any?leaks. In?fact, on a 30 tube system, even if you lost 3 x tubes from a branch or similar object falling on the collector, you will only lose 10% of your solar heating capability! The?tubes are easily replaced. Just un-clip at the base, slide the old tube out & replace with a new tube. In?most cases, the copper heat pipe inside?the?tube will not need replacing.
Q. Other systems are stronger as they have thicker glass tubes!
A. The glass thickness on Apricus evacuated tubes is 1.8mm and has passed the hail impact testing to meet Australian?standards. Although?it may seem counter-intuitive, the thickness does not always indicate strength. More important than thickness is the material structure and quality of the?glass. For?example, some suppliers have glass of 1.6mm thickness. This is stronger to impact than 2mm glass from another supplier due to better quality?glass. So?simply saying “this glass is thicker” is not really a valid or useful comparison.
Q. It’s a hot climate – the tubes get too hot here! I’ve been told they overheat?
A.?Apricus manifolds are rated to handle extreme temperature and pressure (~180°C). During a period of no load (stagnation) only the pressure & temperature relief valve on the storage tank is?required.
Q. Emergency!! I don’t have time to think about solar, I need hot water now!
A.?Consider installing a solar ready tank. It comes with a 10 year warranty and works just like an electric tank allowing you to get hot water today. When you’re ready, you have the option of upgrading to solar at a later date. If you upgrade to solar within 60 days, you may still qualify for rebates (STC & VEEC in Victoria).
Q. My existing tank is still good – Can I just add the tubes to it??
A.?You can install what is called a retro-fit kit with the addition of a 5 way?valve. However,?it?could void the existing storage tanks warranty and you will not qualify for any STC or?VEEC incentives. A complete system after incentives might be a better investment for you.
Q. I want an on-roof tank (Thermosiphon?system)! I’ve seen tubes with a tank on the roof tank before!
A.?We recommend?a split system for many?reasons:
– Weight – our largest collector only weights 110kg full of water vs. half a?tonne?of an on roof system.
– Temperature?control/reduce water wastage?– With a split system, the temperature in the tank is controlled via a controller. So once it is up to its max temperature it will not bring any more heat down. In an on-roof system the “max temperature” safety is usually hot water dumping onto the?roof.
– Aesthetics – the split systems look much nicer on the roof.
Q. I don’t want a pump or controller on my system!
A.?Apricus have been installing evacuated tube systems in Australia for over 10?years. The?pump that is used is a high quality pump designed for solar and manufactured by?Grundfos. The?controller is made in Germany by a company called?Resol. They have been manufacturing and supplying controllers throughout Europe and the world for many?years. Having?a controller can also provide added functionality like real time temperature read outs, data logging & over temperature control. This makes troubleshooting and future servicing much faster.
Q. I don’t have a north roof! Can the systems be installed east or west?
A.?Ideally, the collector should face as close as possible to north. If a north roof is unavailable, you can point 15° East or west with only 5% reduction in?output. Going?due east or west (preferably west) will result in approximately 15% reduction on average over the year. However this may be greater in the winter?months. Be sure to check with relevant standards and regulations as to restrictions on collector orientation. If?there is no roof available, the Apricus collectors can be mounted on the ground, a wall, even a pole!
Q. How long will the tubes last? Will the vacuum go? Will I need to replace it?
A.?Evacuated tubes do not have an industry standard “degradation” value. However, it is estimated that the tubes may lose approximately 0.5% output per?annum. Apricus?tubes are tested to the most stringent of standards. They have a barium coating to absorb any impurities that may occur over time within the tubes?vacuum. Apricus?heat pipes are manufactured from high purity, oxygen free copper to ensure the longevity of the?vacuum. If the vacuum is compromised within the evacuated tubes, they turn white as an indicator. The?tubes are covered by a 15 year warranty guaranteeing that they won’t lose their vacuum.
Q. I’m in a cold region, solar doesn’t work here! Will my tubes freeze in frost?
A.?The Apricus system has built-in frost protection and can handle Australia’s cold and varying climate.?In fact, the tubes also absorb UV light. The vacuum prevents energy from escaping to the atmosphere making them work extremely well even in the coldest regions. The?frost rating is down to -15°C without the use of frost valves or a chemical/anti-freeze solution that other systems require.
Q. Cyclone region – I don’t want anything on the roof that could blow away!
A.?The Apricus systems are rated?for cyclonic wind conditions – Apricus solar collectors are certified to be installed in all wind regions of Australia, even directly on the coast in North QLD, NT &?WA!
Q. I don’t want to put anything heavy on my roof! How much does it weigh?
A.?Weight, our largest single collector weights only ~110kg on the roof full of water, vs. half a?tonne?of an on roof system.
Q.?Isn’t solar hot water expensive?
A. When thinking about the cost, you also need to take into consideration the ongoing/running costs. Going solar may be more expensive up-front, but the running costs will be much less. In fact – the more electricity/gas prices rise in the future, the more you will save!
Apricus Residential?Brochure Downloads
Apricus Commercial Hot Water?Brochure Downloads
Apricus Technical and Specification?Downloads